Technical Information

Getting started with our moisture meter can be done in minutes. Just plug in the gateway and it works.

The sensor has to be screwed in with 2 screws, and then it is registered in a few clicks by scanning a QR code on the sensor, which sends you to our system (without installing an app) and in a few clicks it is registered and operational.

Platform

Here, you can find information about the platform's report, alarm and overview features.

Setting up sensors

Easy and fast setup guide for sensors, so you can begin monitoring the moisture content with the solution within a few minutes.

Set up gateway

Follow the set-up guide for instruction on the 10-second setup of the gateway

Sensor lifespan

Here, you can find information on the battery, our take-back scheme, and how to operate the solution

Verification

Here, you can find the verification of the CE mark, report from Danish Technical Institute and datasheet

Examples of texts for tender documents

Here, you can find examples of documents to include in tenders as building owner or contractor

Floor plan guide

Here, you can find the floor plan guide on how to place your sensors and use it for future reference

Detect leakages with intelligent moisture alarm

How to protect yourself against leakages and other undesirable conditions with our intelligent moisture alarm system

Monitor mold growth with Woodsense

Monitor mold growth preventively with the intelligent moisture sensor and prevent mold growth in buildings